Filter
Top Products
System Error Codes
2-13
HP DesignJet 5000 Series Printers Service Manual
System Error: 0A0030
Problem
Description:
Problem in Depressurizing Air System.
Corrective Action: Try the following:
n Check the APS for any signs of Ink. Also inspect ALL Ink
Cartridges for any signs of leaking (the bottom valve of the Ink
Cartridge will contain ink).
n If there is ink leakage, replace ALL Ink Cartridges, the APS ( ⇒
Page 8-65) and the Tubes System ( ⇒ Page 8-25).
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 0A0040
Problem
Description:
APS Failure.
Corrective Action: Try the following:
n Check all the cables of the APS and make sure they are correctly
connected and are NOT damaged.
n Check all the tubes of the APS and Tubes System and make sure
they are correctly connected and are NOT pinched or damaged.
n Replace ONE Ink Cartridge at a time, checking if the System
Error Code disappears.
n Faulty APS. Replace the complete APS ⇒ Page 8-65.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.