Filter
Top Products
Service Tests and Utilities
4-21
HP DesignJet 5000 Series Printers Service Manual
8. The Printer will then begin to prime the Tubes System.
9. Once the Tubes System is purged, the following message will be
displayed. Lift the Window and remove ALL the Setup Printheads
from the Carriage and install the previously removed printing
Printheads into the Carriage.
10. Once all the Printheads are installed, the following message will
appear on the front panel. Close the carriage cover and close the
window.
11. Open the Right Door and make sure the Printhead Cleaners are
installed in the Service Station.
INK STARTUP
Initializing printer
Please wait. xx sec
INK STARTUP
Lift window to
replace SETUP
printheads
INK STARTUP
All printheads
are OK. Close cover
and window to
continue
INK STARTUP
Open right cover
and install printhead
cleaners