Service Calibrations
5-31
HP DesignJet 5000 Series Printers Service Manual
Calibration Error: 1040 (User)
Problem
Description:
Scan-Axis Alignment Error in "slow" speed section in Black and
Magenta Pattern.
Corrective Action: Try the following:
n Perform Printhead Recovery (⇒ Page 6-15).
n Perform the Service Scan-Axis Calibration ⇒ Page 5-7.
n Replace the Black and Magenta Printheads and repeat Printhead
Alignment (⇒ See the User’s Guide).
n If the media used is a color media try the Printhead Alignment
with white media and if the error persists replace the Lens Cover
⇒ Page 9-5.
n Replace the Carriage Assembly ⇒ Page 8-46.
Calibration Error: 1041 (User)
Problem
Description:
Scan-Axis Alignment Error in "slow" speed section in Cyan and
Yellow Pattern.
Corrective Action: Try the following:
n Perform Printhead Recovery (⇒ Page 6-15).
n Perform the Service Scan-Axis Calibration ⇒ Page 5-7.
n Replace the Cyan and Yellow Printheads and repeat the Printhead
Alignment (⇒ See the User’s Guide).
n
If the media used is a color media try the calibration with white
media and if the error persists replace the Lens Cover
⇒
Page
9-5
.
n Replace the Carriage Assembly (⇒ Page 8-46).
Calibration Error: 1042 (User)
Problem
Description:
Scan-Axis Alignment Error in "slow" speed section in Light Cyan
and Light Magenta Pattern.
Corrective Action: Try the following:
n Perform Printhead Recovery (⇒ Page 6-15).
n Perform the Service Scan-Axis Calibration (⇒ Page 5-7).
n Replace both Printheads and repeat Printhead Alignment.
n If the media used is a color media try the calibration with white
media. If the error persists replace the Lens Cover ⇒ Page 9-5.
n Replace the Carriage Assembly ⇒ Page 8-46.