Service Calibrations
5-10
HP DesignJet 5000 Series Printers Service Manual
7. The Printer then performs the Printhead to media spacing
calibration and displays the following message:
During this stage the Printer will print the following pattern.
8. On successfully completing the Calibration, the following message
is displayed:
9. Press Back to return to the Service Calibrations menu.
If the Calibration fails the following message is displayed. Press
Enter to continue.
NOTE Refer to page 5-26, Calibration Error Codes to troubleshoot
error codes.
Printhead to media
spacing
Calibrating...
Please wait.
Calibrating line sensor.
2.1 Scan Axis Calib
Press BACK to return
Calibration performed
Top
Enter
Back
↑
↓
Press Back
to previous menu
correctly
2.1 Scan Axis Calib
Calibration Error
(xxxx)
Press ENTER to continue
Top
Enter
Back
↑
↓
Press Enter