Filter
Top Products
Service Calibrations
5-3
HP DesignJet 5000 Series Printers Service Manual
Service Calibrations
The following is a list of all internal Service Calibrations available
in the Printers. Instructions for entering the Service Calibrations
menu are given on Page 5-4.
1. Scan Axis Calibration ⇒ Page 5-7
The purpose of this Service Calibration is to calibrate the Printhead
in relation to the media and the Platen Assembly.
2. Service Station ⇒ Page 5-11
The purpose of this Service Calibration is to calibrate the Service
Station in relation to the Carriage Assembly.
3. Accuracy Calibration ⇒ Page 5-14
The purpose of this Service Calibration is to calibrate the nominal
advance of the Paper-Axis Motor, changing the factory default
values stored on the EEROM. This calibration is necessary to
control the exact movement of the media in order to avoid print
quality problems like banding.
u Carriage Height Calibration ⇒ Page 5-18
The purpose of this Service Calibration is to adjust the distance
between the Carriage and the Center Platen. This calibration is
necessary in order to prevent problems like Printhead crashes.