Filter
Top Products
Service Calibrations
5-29
HP DesignJet 5000 Series Printers Service Manual
Calibration Error: 0100
Problem
Description:
Printhead error.
Corrective Action: Try the following:
n Check the colors in the calibration pattern. If the quality of a
color is not acceptable the Printhead has failed for that color.
Perform Recovery (⇒ Page 6-15) for the Printhead and repeat the
calibration.
n If the error persists for that color, replace the Printhead.
Calibration Error: 1001 (User)
Problem
Description:
Line Sensor Error.
Corrective Action: n Replace the Carriage Assembly ⇒ Page 8-46.
Calibration Error: 1002 (User)
Problem
Description:
The Line Sensor pattern is not printed. Firmware error.
Corrective Action: Try the following:
n Power the Printer OFF and ON to reset the memory.
n Upgrade the Firmware ⇒ Page 9-12.