Filter
Top Products
Service Tests and Utilities
4-29
HP DesignJet 5000 Series Printers Service Manual
Reset Life Counters
The purpose of this Service Utility is to reset the preventive
maintenance counters when parts have been replaced. When you
reset a preventive maintenance counter for a part, the Printer will
stop displaying the maintenance warning or stop message for the
part.
NOTE You should only reset the life counter for a certain component
when it has been replaced by a new one. Never reset the life
counter for a component when it has not been replaced.
1. In the Service Utilities submenu, scroll to "1.5 Reset Life Counters "
and press Enter.
2. The following options are displayed for Reset Life Counters. Press
Enter once you have made your selection.
3. A message confirming the selection is displayed. Press Enter to
confirm the reset of the life counter or Back to cancel.
1. Service Utilities
1.3 Altitude Setup
1.2 Prime TUBES
1.4 EEROM Setup
1.5 Reset Life Counters
1.6 Backup EEROM
Top
Enter
Back
↑
↓
Press Enter
Make Selection
1.1 Turn DRIVE ROLLER
1.5.1 Scan Axis
1.5.2 Cuts
1.5.3 Printh. Insertions
1.5 Reset Life Counters
Top
Enter
Back
↑
↓
Press Enter
Make Selection
1.5.1 Scan Axis
Limit: 11000000
Current: 11005000
Reset this life counter?
Press ENTER to accept
or BACK to exit
Top
Enter
Back
↑
↓
Make Selection