Removal and Installation
8-50
HP DesignJet 5000 Series Printers Service Manual
15. Unclip and remove the Carriage
Cover to access the Trailing Cable in
the Carriage.
16. Carefully disconnect the Trailing
Cables (3) from the connectors in the
Carriage PCA.
NOTE Remove Trailing Cable
Ferrites if they fall into the
Carriage
n 3 for 60" Model.
n 1 for 42" Model.
17. Remove the Trailing Cables from the
Trailing Cable Holder.
TIP Press the Trailing Cables
firmly in the center to
release.
Press down in
center to release