Filter
Top Products
Troubleshooting
1-18
HP DesignJet 5000 Series Printers Service Manual
Trailing Cable connection, so just reconnect the Trailing Cable again
to double-check that the Printer now works. If, after reconnecting the
cable, the error appears again, either the Carriage PCA or the
Trailing Cable is defective. In this case, first try replacing the
Trailing Cable and then the Carriage Assembly.
n
If the Printer did not initialize correctly, even after removing the
Trailing Cable, the problem is either in the Main PCA or the ISS
PCA. So, once again, to isolate the failure, disconnect first the ISS
cable and check whether the Printer works. If it does, reconnect the
cable again to verify the failure and then, if necessary, replace either
the ISS cable or the ISS PCA.
n
If the Printer still does not initialize, even after removing the Trailing
Cable and the ISS cable, replace the Main PCA.