Removal and Installation
8-88
HP DesignJet 5000 Series Printers Service Manual
Ink Leak Detector
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Left Rear Cover - Refer
to Page 8-15.
2. Remove the Top Cover - Refer to
Page 8-5.
3. Remove the Back Cover - Refer to
Page 8-23.
4. Disconnect the Ink Leak Detector
cable at position P2 from the ISS
PCA.
5. Remove one T-15 screw (Type B) to
release the cable clip on the Top EMC
cover.
P2