Filter
Top Products
System Error Codes
2-11
HP DesignJet 5000 Series Printers Service Manual
System Error: 050000 (Continuable)
Problem
Description:
Lens has problems reading the Mark Encoder on the Drive Roller.
Corrective Action: Try the following:
n Clean the Mark Encoder on the Drive Roller using the Turn
DRIVE ROLLER Utility ⇒ Page 4-18
n Replace the Lens Cover Assembly ⇒ Page 9-5.
System Error: 050001 (Continuable)
Problem
Description:
Lens has problems reading the Mark Encoder on the Drive Roller.
Corrective Action: Try the following:
n Clean the Mark Encoder on the Drive Roller using the Turn
DRIVE ROLLER Utility ⇒ Page 4-18
n Replace the Lens Cover Assembly ⇒ Page 9-5.
System Error: 06030C
Problem
Description:
Bad Line Sensor.
Corrective Action: Try the following:
n Replace the Carriage Assembly ⇒ Page 8-46
n Replace the Trailing Cable ⇒ Page 8-36.
n Replace the Main PCA ⇒ Page 8-79.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.