Filter
Top Products
System Error Codes
2-15
HP DesignJet 5000 Series Printers Service Manual
System Error: 0B0001
Problem
Description:
At power-up, the Printer thinks it is smaller than 42 inches.
Corrective Action: Refer to System Error Code ffff ffff 030d0170 or ffff ffff 030d0171.
System Error: 0B0002
Problem
Description:
Bad IDS pressure read.
Corrective Action: Try the following:
n Check that the cable from the Ink Supply Station (ISS) PCA to
the Ink Supply Station is correctly connected.
n Check that the Air Pressurization System Sensor Cable is
correctly connected and is NOT damaged.
n Check all the tubes of the APS and make sure they are NOT
pinched or damaged.
n Faulty APS. Replace the APS ⇒ Page 8-65.
n If the error code continues, replace the Main PCA ⇒ Page 8-79.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 0B0003
Problem
Description:
ADC0 Internal channels check Failure.
Corrective Action: Replace the Main PCA ⇒ Page 8-79.