Filter
Top Products
Service Calibrations
5-16
HP DesignJet 5000 Series Printers Service Manual
6. The Printer will unload the media and request you to remove it from
the Printer. Press Enter to continue.
7. The following message is displayed. Press Load/Unload Media to
start the load procedure for the printed sheet.
8. When loading, rotate the pattern so that the edge with the arrows
points to the leading edge, and then reload the pattern with the arrow
edge print facing down. The Printer will load the pattern and then
measure the alignment marks using the Line Sensor on the Carriage
Assembly. The following message will be displayed while the
Printer measures the pattern:
9. Once the calibration is completed, the following message will be
displayed. Press Enter to return to the Accuracy Calibration menu.
Roll Unloaded.
Remove Media.
Press Enter to coninue
Top
Enter
Back
↑
↓
Press Enter
ACCURACY
Press Load/Unload
key to load
Load/Unload
Enter
Back
↑
↓
Press Load/Unload Media
printed sheet
Media
Top
ACCURACY
Measuring
Press Enter to continue
Top
Enter
Back
↑
↓
Press Enter
Calibration done