Filter
Top Products
Removal and Installation
8-93
HP DesignJet 5000 Series Printers Service Manual
Pinch-Wheels
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Top Cover - Refer to
Page 8-5.
2. Remove the Back Cover - Refer to
Page 8-23.
3. Remove the Electronics Module -
Refer to Page 8-92.
4. Remove EMC Covers as one
assembly - Refer to Page 8-32.
NOTE For the next steps place the
Media Lever in the UP
position.
5. Remove the following T-20 screws
(Type Q):
n For the 60" Model remove 4 screws
from each group of 4 Pinch-Wheels
(5 groups in total).
n For the 42" Model remove 4 screws
from each group of 4 Pinch-Wheels
(3 groups in total) and 2 screws
from the one group with 2 Pinch-
Wheels.