Filter
Top Products
System Error Codes
2-12
HP DesignJet 5000 Series Printers Service Manual
System Error: 0A0000
Problem
Description:
APS Failure.
Corrective Action: Try the following:
n Check all the cables of the APS and make sure they are correctly
connected and are NOT damaged.
n Check all the tubes of the APS and Tubes System and make sure
they are correctly connected and are NOT pinched or damaged.
n Check that the Air Tube from the APS is correctly connected to
the Tubes System.
n Replace ONE Ink Cartridge at a time, checking if the System
Error Code disappears.
n Faulty APS. Replace the APS ⇒ Page 8-65.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 0A0010
Problem
Description:
APS Failure.
Corrective Action: Refer to System Error Code 0A0000.
System Error: 0A0020
Problem
Description:
Error in Calibrating the APS Sensor.
Corrective Action: Try the following:
n Check the APS Sensor and the valve cables, making sure that
they are NOT damaged and connected correctly.
n Replace the APS ( ⇒ Page 8-65) or the ISS PCA ( ⇒ Page 8-86).