Removal and Installation
8-108
HP DesignJet 5000 Series Printers Service Manual
16. Remove the Booster Fan - Refer to
Page 8-103.
17. Remove the Media Sensor - Refer to
Page 8-104.
18. Remove the Entry Roller - Refer to
Page 8-106.
19. Remove 3 T-15 screws (Type J) that
secure the Center Guide to the left
Sideplate.
20. Remove 1 T-15 screw (Type J) and 2
T-20 screws (Type T) that secure the
Center Guide to the right Sideplate.
21. Remove the Center Guide as follows:
n Lift it from the front to release it.
n Pull it out in a rotating movement.
1
2