Removal and Installation
8-18
HP DesignJet 5000 Series Printers Service Manual
Media Lever Assembly
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Deflector closest to the
Right Cover - Refer to Page 8-114.
2. Remove the Right Hand Cover - Refer
to Page 8-10.
3. Raise the Media Lever.
4. Remove 1 T-15 screw (Type D) from
the support that attaches the Media
Lever to the Sideplate.