Removal and Installation
8-110
HP DesignJet 5000 Series Printers Service Manual
Front Platen Assembly
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Left Hand Trim - Refer to
Page 8-22.
2. Open the Top Cover.
NOTE Make sure the Carriage is
not in the print Platen area.
3. Remove the following screws (Type
R) from the Front Platen Assembly:
n 15 T-10 screws in the 60" Model.
n 11 T-10 screws in the 42" Model.