Filter
Top Products
System Error Codes
2-24
HP DesignJet 5000 Series Printers Service Manual
System Error: e50000
Problem
Description:
This is an error that is related to the Hard Disk Drive, either the connections
are bad or that the Hard Disk Drive or the Main PCA are defective.
Corrective Action: Try the following:
n Unplug the Printer, remove the HDD cover and check that the
two cables (a flat one and the power cable) are connected. Also
check that the flat cable connector is clipped in correctly. If the
problem persists, replace the Hard Disk Drive ⇒ Page 8-72.
n If the problem continues, check that the Green and Orange LED’s
on the Main PCA are ON. If they are not ON, probably the PWS
or its connections are defective. If the two LED’s are ON and the
error continues, replace the Main PCA ⇒ Page 8-79.