Filter
Top Products
Service Tests and Utilities
4-3
HP DesignJet 5000 Series Printers Service Manual
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. If the error is still
present after replacing a component, remember to REINSTALL
the component that was first removed before replacing another
component.
Self Diagnostics - Initialization Sequence
LED’s Front Panel Message Printer Error - Error
Message/Code
Corrective Action
The Printer hangs and
nothing else happens
Install the BootROM or replace it if already
installed ⇒ Page 8-75.
Self Test
Please Wait
Error Memory
Config:X
(sometimes only the
error code is
displayed)
If X = 7 reseat the DRAM DIMM’s,
otherwise
replace the DRAM DIMM’s ⇒ Page 8-75.
Error Memory Test Replace the DRAM DIMM’s ⇒ Page 8-75.
End Self Test
Initializing Power Supply Error
#1
Contact HP
Representative
The Trailing Cable is not connected
correctly. Reconnect the Trailing Cable ⇒
Page 8-36.
Initializing IO devs BootROM checksum
failed
Replace the BootROM ⇒ Page 8-75.
Max. Quality
Productivity
Max. Speed
Max. Quality
Productivity
Max. Speed
Max. Quality
Productivity
Max. Speed
Max. Quality
Productivity
Max. Speed