Filter
Top Products
Service Calibrations
5-40
HP DesignJet 5000 Series Printers Service Manual
Calibration Error: 5015 (Service)
Problem
Description:
Printhead Cleaner is not correct type.
Corrective Action: Try the following:
n Insert a HP. 81 Printhead Cleaner.
Calibration Error: 6000 (Service)
NOTE This code is not an error. See the other codes reported.
Calibration Error: 6001 (Service)
Problem
Description:
Drop Detector not working.
Corrective Action: Try the following:
n Turn the Printer OFF and ON and repeat the Service Station
Calibration ⇒ Page 5-11.
n Replace the Drop Detector Assembly ⇒ Page 8-70.
n If the Error Code continues, replace the Main PCA ⇒ Page 8-79.
Calibration Error: 6003 (Service)
Problem
Description:
Drop Detector did not calibrate for Black Printhead.
Corrective Action: Try the following:
n Turn the Printer OFF and ON and repeat the Service Station
Calibration ⇒ Page 5-11.
n Replace the Drop Detector Assembly ⇒ Page 8-70.
n If the Error Code continues, replace the Main PCA ⇒ Page 8-79.
Calibration Error: 6004 (Service)
Problem
Description:
More than one Printhead not calibrated.
Corrective Action: Try the following:
n Turn the Printer OFF and ON and repeat the Service Station
Calibration ⇒ Page 5-11.
n Replace the Drop Detector Assembly ⇒ Page 8-70.
n If the Error Code continues, replace the Main PCA ⇒ Page 8-79.