Filter
Top Products
73
[Preparation]
Preparation
Auxiliary Function Mode
Alarm Clear Screen
Protective function will be activated and release the motor stall status (error status).
Alarm clear starts.
Clearing finishes.
Clear is not finished.
Release the error by resetting
the power.
Alarm clear completes
After alarm cleaning, return to SELECTION display, referring to structure of each mode (P.60 and 61).
<Remarks>
Don't disconnect the console from the driver between and .
Should the connector is pulled out, insert it again and repeat the procedures from the beginning.
Starting from the initial LED status,
Press four time after pressing ,
then press to make a display to
Press to call for
EXECUTION display of
Keep pressing until the console (LED)
changes to
“
”
increases by pressing
(approx. 5sec) as the right fig. shows.
Operation at SELECTION display
Operation at EXECUTION display