Filter
Top Products
UC [n], specifies that the line and the subsequent n-1 lines are to be converted. The second (block) form
(UCUC or UCC) is placed on the first and last lines of the block to be converted.
See Also
ispf_caps, ISPF Line Command Lowercase, lowcase, upcase
ISPF Exclude Lines X and XX for blocks
Usage
• X [n] - Exclude n lines starting with the line with the command.
• XX - Exclude a block of lines, must match another XX.
Remarks
Specifies one or more lines to be hidden (excluded). There are two forms to this command. The first form
(X [n]) specifies that the line and the subsequent n-1 lines are to be excluded. The second (block) form
(XX) is placed on the first and last lines of the block to be excluded.
See Also
ispf_exclude, ispf_reset, ISPF Line Command First, ISPF Line Command Last, ISPF Line Com-
mand Show
ISPF Select Lines Z and ZZ for blocks
Usage
• Z [n] - Select n lines starting with the line with the command.
• ZZ - Select a block of lines, must match another ZZ.
Remarks
Select a block of lines. There are two forms to this command. The first form (Z [n]) specifies that the line
and the subsequent n-1 lines are to be selected. The second (block) form (ZZ) is placed on the first and
last lines of the block to be selected.
See Also
ispf_cut, ispf_paste
XEDIT Line Commands
The following XEDIT line commands are supported and override the like-named ISPF commands when
there is a conflict. XEDIT commands can be enabled using the ISPF Options dialog box (Window →
Preferences, expand SlickEdit and click General in the tree, then double-click the ISPF Options set-
ting).
Table 11.9. XEDIT Line Commands
ISPF Line Commands
516