Filter
Top Products
Interrupts
Interrupt Control Registers
MN102H75K/F75K/85K/F85K LSI User Manual Panasonic Semiconductor Development Company
61
Panasonic
RMCICL: Remote Signal Receive Interrupt Control Register (Low) x’00FC76’
RMCICL detects and requests remote signal receive interrupts. It is an 8-
bit access register. Use the MOVB instruction to access it.
RMCIR: Remote signal receive interrupt request flag
0: No interrupt requested
1: Interrupt requested
RMCID: Remote signal receive interrupt detect flag
0: Interrupt undetected
1: Interrupt detected
RMCICH: Remote Signal Receive Interrupt Control Register (High) x’00FC77’
RMCICH enables remote signal receive interrupts. It is an 8-bit access regis-
ter. Use the MOVB instruction to access it.
The priority level for remote signal receive interrupts is written to the
TM2UDLV[2:0] field of the TM2UDICH register.
RMCIE: Remote signal receive interrupt enable flag
0: Disable
1: Enable
ADM3ICL: Address 3 Match Interrupt Control Register (Low) x’00FC78’
ADM3ICL detects and requests address match 3 interrupts. It is an 8-bit
access register. Use the MOVB instruction to access it.
ADM3IR: Address match 3 interrupt request flag
0: No interrupt requested
1: Interrupt requested
ADM3ID: Address match 3 interrupt detect flag
0: Interrupt undetected
1: Interrupt detected
Bit:76543210
———
RMC
IR
———
RMC
ID
Reset:00000000
R/W:RRRR/WRRRR
Bit:76543210
———————
RMC
IE
Reset:00000000
R/W:RRRRRRRR/W
Bit:76543210
———
ADM3
IR
———
ADM3
ID
Reset:00000000
R/W:RRRR/WRRRR