Filter
Top Products
Appendix J Factory Default List
J.2 Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1033
J.2 Connectivity
Function Setting item Default value Allowed input
Add Host Group
• FC/FCoE
• iSCSI
• SAS
Host Response Default
• Solaris MPxIO
• HP-UX
• AIX EMPD
• AIX VxVM
• AIX Single Path
• VS850/SVC
• Host responses created in the
ETERNUS DX Disk storage
system
• Default
Add Host
• FC/FCoE
• iSCSI
• SAS
Modify FC Port
Parameters
(When the port
mode is "CA" or
"CA/RA")
Connection FC-AL
• Fabric
• FC-AL
Set Loop ID Manual
• Manual
• Auto
Loop ID When "Set Loop ID" is "Manual"
• 0x0
When "Set Loop ID" is "Auto"
• Ascending
When "Set Loop ID" is "Manual"
• 0x0 – 0x7D
When "Set Loop ID" is "Auto"
• Ascending
• Descending
Transfer Rate Auto-negotiation
• Auto-negotiation
• 1 Gbit/s
• 2 Gbit/s
• 4 Gbit/s
• 8 Gbit/s
• 16 Gbit/s
The available transfer rate varies
depending on the CA type.
Frame Size 2048
• 512 (bytes)
• 1024 (bytes)
• 2048 (bytes)
Reset Scope I_T_L
• I_T_L
• T_L
Release
Reservation if Chip
is Reset
Disable
• Enable
• Disable
REC Line No. 0
• 0 – 127
This item is displayed only when
"Port Mode" is "CA/RA".