Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
463
2 Click the [OK] button.
→ Deletion of the host group starts.
3 Click the [Done] button to return to the [Host Group] screen.
End of procedure
9.2.2.5 Modify Host Group
This function performs the following modifications to the existing host group.
• Changing the "Host Group Name" settings
• Changing the "Host Response" settings
• Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Operation screens for modifying host groups vary with the interface types.
• Refer to "9.2.2.6 Modify Host Group (FC/FCoE)" (page 463)
to edit FC/FCoE host groups.
• Refer to "9.2.2.7 Modify Host Group (iSCSI)" (page 470)
to edit iSCSI host groups.
• Refer to "9.2.2.8 Modify Host Group (SAS)" (page 480)
to edit SAS host groups.
9.2.2.6 Modify Host Group (FC/FCoE)
This function performs the following modifications to the existing FC/FCoE host group.
• Changing the "Host Group Name" settings
• Changing the "Host Response" settings
• Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Hosts can be added to host groups which the host affinity setting has been already configured, or deleted
from host groups.
If a host is added, the host affinity setting is automatically configured to the host, as a host group member.
If a host is deleted, the host affinity setting is cleared from the corresponding host.