Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
493
2 Add a host in the ETERNUS DX Disk storage system in the following procedures.
■ When registering a host by selecting from the host list
(1) Click the [Now Connected] tab.
All of the unregistered hosts that are connected to the iSCSI-CAs or the iSCSI-CA/RAs and that can be
recognized by the ETERNUS DX Disk storage system (*1) are displayed. Select the hosts that are to
be registered in the ETERNUS DX Disk storage system and specify the iSCSI host information.
*1: "Host that is not registered in the ETERNUS DX Disk storage system" indicates that a host with the
same iSCSI name, IP version, and Alias Name as the target host is not registered in the storage
system. The host is regarded as unregistered host even if a host with the same iSCSI name, IP version,
Alias Name, and different IP address is already registered. The obtained "iSCSI Name" and "Port" are
displayed.
(2) Select the host that is to be registered from the iSCSI host list, input the iSCSI host information, and
click the [Add] button.
- Checkbox to select a host
Select the checkbox of the iSCSI host that is to be registered in the ETERNUS DX Disk storage
system.
- Name
Input the name for the iSCSI host.
The following input conditions apply:
• Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
• Space
• If the iSNS server has not been configured in "9.2.3.8 Modify iSCSI Port Parameters" (page
541), the iSCSI host cannot be automatically acquired.
• The following restrictions in the environment that is described below apply for the
automatic acquirement of host information (*1) even when the iSNS server is specified.
*1: "iSCSI Name", "IP Version", "IP Address", and "Alias Name"
- When one of the following OSs is used and there are multiple hosts that have the same
iSCSI name but different IP addresses, only the information of one host can be acquired.
• Windows Server 2003
• Windows Server 2008
• Windows Server 2008 R2
• Oracle Solaris 10
- When the host OS is Oracle Solaris 11, "IP Version" and "IP Address" cannot be acquired.
• The following items can be specified only for the iSCSI hosts that are selected by
checkboxes; "Name", "Host Response", "IP Version", "IP Address", "Alias Name", "CHAP User
ID", "CHAP Password", and "Confirm CHAP Password".