Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
760
• ICMP
Specify whether to enable or disable the ICMP connection. Select the checkbox to enable the
connection.
The Internet Control Message Protocol (ICMP) is used when sending the ping command from a PC.
• Maintenance-Secure
Specify whether to enable or disable the Maintenance-Secure connection. Select the checkbox to
enable the connection.
Maintenance Secure is used when connecting with the monitoring software, or performing a
firmware update from the peer storage system using the Remote Support function. This connection
uses the data encryption for data transferring.
• SNMP
Specify whether to enable or disable the SNMP connection. Select the checkbox to enable the
connection.
The Simple Network Management Protocol (SNMP) is used when accessing from SNMP Manager.
• RCIL
Specify whether to enable or disable the RCIL connection. Select the checkbox to enable the
connection.
Whether to enable or disable RCIL can only be set for the MNT port. The Remote Cabinet Interface
over LAN (RCIL) controls the power of the ETERNUS DX Disk storage system from a host via Ethernet
by using the Intelligent Platform Management Interface (IPMI), which is a general protocol.
→ A confirmation screen appears.
3 Click the [OK] button.
→ Setting of the firewall starts.
4 Click the [Done] button to return to the [Network] screen.
End of procedure