Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
57
6-5 Click the [OK] button.
→ Setting of the SNMP Agent User starts.
6-6 Click the [Done] button.
7 Proceed to [Set SNMP Agent Community].
7-1 Click the [Add] button.
The [Set SNMP Agent Community] function must be set when using SNMPv1 or SNMPv2c in SNMP
communication between the SNMP Agent and SNMP Manager. The SNMP Agent Community
setting is not necessary when using SNMPv3 only.
Click the [Skip] button to proceed to the next screen without setting.