Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
611
2 Select the FC port bandwidth limit, and click the [Set] button.
• Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3 Click the [OK] button.
→ The FC port QoS setting starts.
4 Click the [Done] button to return to the [FC Port QoS] screen.
End of procedure
9.2.7.10 Set iSCSI Port QoS
This function specifies the bandwidth limit (maximum performance limit) for the iSCSI port.
• The bandwidth limit can be configured only for the ports in the port mode of "CA" or "CA/RA". For the ports
in the port mode of "RA", the bandwidth limit cannot be specified.
• If the port mode has been changed from "CA" or "CA/RA" to "RA", the bandwidth limit returns to the
default value.
• This function can be used, irrespective of whether the Host-LU QoS is enabled or disabled. However, if the
Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.