Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
605
2 Click the [OK] button.
→ Acquisition of Host-LU QoS performance information stops.
3 Click the [Done] button to return to the [Host-LU QoS] screen.
End of procedure
■ When this function is selected in the [Port QoS] screen for each host interface
Procedure
1 Select the port to stop the Host-LU QoS performance monitoring for (multiple selections can
be made) and click [Stop Perfmon] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ Acquisition of Host-LU QoS performance information stops.
3 Click the [Done] button to return to the screen when starting this function in Step 1.
End of procedure
9.2.7.6 Set FC/FCoE Host QoS
This function configures the bandwidth limit (the maximum performance limit) of the FC/FCoE host.
This function can be used, irrespective of whether the Host-LU QoS has been enabled or disabled. However, if
the Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.