Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
373
Display Examples of Host Affinities
Display examples for the host affinity are shown in the following table.
Example
No.
Display contents Description
Host
Group
Host CA Port
Group
CA Port LUN
Group
Host
Response
Example
1
Host_
Group_
xxx
–Port_
Group_
xxx
–LUN_
Group_
xxx
Host_
Response1
The host affinity setting has
been configured in
"Host_Group_xxx",
"Port_Group_xxx" and
"LUN_Group_xxx".
The server recognizes the LUN
group, "LUN_Group_xxx", which
has been specified for each
member host (HBA) in
"Host_Group_xxx".
Example
2
All All Port_
Group_
yyy
–LUN_
Group_
yyy
Host_
Response2
All servers will be covered.
The server recognizes the
specified LUN group,
"LUN_Group_yyy", from every
member port in
"Port_Group_yyy".
Example
3
Host_z CM#0
CA#0
Port#0
LUN_
Group_
zzz
Host_
Response3
The host affinity setting of
"Host_z (HBA)" and "LUN
Group_zzz" has been configured
to the device side CA port,
"CM#0 CA#0 Port#0".
Hosts, CA ports, and LUN groups
are allocated without specifying
a host group or CA port group.
Example
4
–All–CM#1
CA#1
Port#1
LUN_
Group_
www
Host_
Response4
The LUN mapping of
"LUN_Group_www" has been
configured to the device side CA
port, "CM#1 CA#1 Port#1".
Hosts, CA ports, and LUN groups
are allocated without specifying
a host group or CA port group.
Example
5
–All–CM#0
CA#1
Port#1
Host_
Response5
The LUN is directly allocated to
CA port "CM#0 CA#1 Port#1" by
an application other than GUI
(LUN mapping is created).