Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
778
3 Click the [OK] button.
→ A dialog box to download the file appears.
4 Save the downloaded file.
The file name is as follows:
• ETERNUS DX80 S2/DX90 S2: "FJDARY-E100.MIB"
• ETERNUS DX410 S2/DX440 S2: "FJDARY-E100.MIB"
• ETERNUS DX8100 S2: "FJDARY-E100.MIB"
• ETERNUS DX8700 S2: "FJDARY-E102.MIB"
→ The downloaded file is saved.
5 Click the [Done] button to return to the [Network] screen.
End of procedure
11.2.3.10 Send SNMP Trap Test
This function transmits the test trap from the SNMP Agent to the SNMP Manager.
The SNMP Trap is the event information reported by the ETERNUS DX Disk storage system (SNMP Agent).
Perform SNMP Agent and SNMP Manager settings before executing this test.
• Perform the following settings before executing this test. If the SNMP function is disabled, the trap test
cannot be performed.
- Setup Network Environment
- Setup SNMP Agent Basic Interface
- Setup SNMP Manager
- Setup SNMP Agent MIB Access View
- Setup SNMP Agent User
- Setup SNMP Agent Community
- Setup SNMP Agent Trap
• This function transmits a test trap.
• When SNMP Manager exists in a different subnetwork from where the ETERNUS DX Disk storage system
belongs, specify the IP address or the network address of SNMP Manager in the "Allowed IP List" using the
procedure in "11.2.3.1 Setup Network Environment" (page 745)
.