Filter
Top Products
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
209
• Balancing Level
The balancing level of the FTRP is displayed.
If multiple FTSPs exists in the FTRP, the lowest balancing level among the FTSPs is displayed. A "-" (hyphen)
is displayed when the physically allocated capacity cannot be checked due to the storage system status or
when the balancing level cannot be obtained due to the FTRP status (*1).
- High
The physically allocated capacity among the RAID groups in the FTSP is equalized.
- Middle
The physically allocated capacity among the RAID groups in the FTSP is slightly unequal.
- Low
The physically allocated capacity among the RAID groups in the FTSP is significantly unequal.
• Balancing Process
A "-" (hyphen) is displayed when FTRP balancing is not being performed, when the physically allocated
capacity cannot be checked due to the storage system status, or when the balancing level cannot be
obtained due to the FTRP status (*1).
- Status
The balancing status of the FTRP is displayed.
• Active
All of the FTVs in the FTRP are either reserved or operating normally.
• Error
An FTV in error status exists in the FTRP.
- Error Code
The error code of FTRP balancing is displayed when an error occurs.
A "-" (hyphen) is displayed if no errors occur.
*1: The status of the FTRP is not " Available", " Partially Readying", or " Exposed"
7.1.6 Thin Provisioning Pool Detail (Basic)
Click the [No.] link or the [Name] link on the "7.1.1 Thin Provisioning Pool (Basic Information)" (page 200) to
display the corresponding Thin Provisioning Pool Details screen.