Filter
Top Products
Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
130
• Select Destination Migration
Specify the destination RAID group, the TPP, or the FTRP with the radio button. The RAID groups,
TPPs, or FTRPs that can be used for migration are displayed (this is determined by the volume
capacity and the encryption status).
→ A confirmation screen appears.
3 Click the [OK] button.
→ Migration starts.
4 Click the [Done] button to return to the [Volume] screen.
End of procedure
• If the migration source is an ODX Buffer volume, select "RAID Group / Thin Provisioning Pool /
Flexible Tier Pool" for "Destination Migration".
• An error screen appears in the following conditions:
- When the "Volume Capacity" is not input
- When "Volume Capacity" does not satisfy the input conditions
- When "Enable" is selected for "Start Zero Reclamation after migration" while Zero Reclamation
is being performed in a migration source volume
- When the migration source is an ODX Buffer volume and "Enable" is selected for "Start Zero
Reclamation after migration"