Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
911
3 Check the path group, and click the [Start] button.
A confirmation screen appears.
- The destination volume is in the following conditions:
Invalid characters are input
- When inputting a value other than 4-digit hexadecimal number for a Storage Migration
setting file with the old format
- When inputting a value that is not a decimal number or a 4-digit hexadecimal number
for a Storage Migration setting file in the new format
The volume number is out of range
Not specified
The status is abnormal
The volume type is not "Standard", "WSV", "TPV", or "FTV".
The same value is duplicated in the Storage Migration setting file
The value is already used in a Storage Migration in execution
When an error is detected in the script analysis
An error screen is displayed when the obtained destination device information is in the following
conditions:
- When two or more source storage systems are specified in single "GROUP".
- The source storage system has other Storage Migration instance already started.
- When the source storage system status is not normal
- The source WWN being set for "PATH" does not exist
- The source LUN is in the following conditions:
The source device information is not exist.
An unusable status is detected.
The capacity exceeds that of the destination volume.
Click the [Path Group] link to display the [Path Group Detail Information] screen. Refer to "11.1.14
Path Group Detail Information" (page 734) for display items.