Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
927
3 Click the [OK] button.
→ Acquisition of performance information stops.
4 Click the [Done] button to return to the [Utility] screen.
End of procedure
11.2.13 System Management
This section describes system management.
System management provides the following functions:
• Modify Storage System Name
• Modify Date and Time
• Change Box ID
• Setup Subsystem Parameters
• Setup Encryption Mode
• Setup SMI-S Environment
• Register SED Authentication Key
• Setup Power Management
11.2.13.1 Modify Storage System Name
This function registers the name, administrator, and the installation site of the ETERNUS DX Disk storage
system.
Information registered in this screen is used for the following functions and screens:
• Network management using SNMP
• Storage system name displayed in the login screen and the operation screens
The procedure to change the storage system name is as follows:
Procedure
1 Click [Modify Storage Name] in [Action].
Once the storage system name has been specified, it cannot be deleted (it can be changed).