Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
390
• Status
Whether the host response is used ("Active") or not ("Inactive") for the host affinity settings is displayed.
- Active
The host response is used for the host affinity settings.
- Inactive
The host response is not used for the host affinity settings.
9.1.7 CA Reset Group
A list of the registered CA reset groups is displayed.
A "CA reset group" is a group of ports which are released simultaneously under the instruction of a server.
The following items are displayed in the Main area:
• CA Reset Group Member
The location information of member ports of each CA reset group is displayed.
If there are several ports, the ports are displayed, being separated with a ", (comma)". If there are three or
more ports the [more...] link are displayed.
- CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
9.1.8 Host-LU QoS
A list of the registered Host-LU QoS groups is displayed.
The Host-LU QoS list shows the association between "Host", "CA Port", and "LUN Group", bandwidth limit
(performance limits), and performance information.
• When using GUI, schedule settings for QoS parameters and displaying scheduled QoS parameters are not
available. Use CLI to check the scheduled QoS parameters that are specified using CLI. GUI displays only
the bandwidth limit and the performance information that are specified by using GUI.
• Host-LU QoS does not support from LUN#1024 onward. If volumes are mapped from LUN#1024 onward,
only the first 1024 LUNs (LUN#0 - LUN#1023) are displayed.