Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
885
● Warning Severity Level
Select whether to notify of a warning event for each event type.
• Parts Warning
Select whether to notify when a warning level event occurs in a part other than the drive. When
notifying, select the notification method.
• Disk Warning
Select whether to notify when a warning level event occurs in the drive for each condition shown
below. When notifying, select the notification method.
- Any Time
Always notifies when a warning level event occurs in the drive.
- when HS<0
Notifies only if a warning level event occurs in the drive when available hot spare disk is "0" (*1).
*1: When rebuilding cannot be performed because there are no hot spares that can be used as a
substitute for the failed drive.
• Temperature Warning
Select whether to notify when a temperature warning status is detected by the sensor. When
notifying, select the notification method.
• Battery life Warning
Select whether to notify a battery expiration in advance (*1). When notifying, select the notification
method.
"Battery life Warning" notification is available only for ETERNUS DX410 S2/DX440 S2 or ETERNUS
DX8100 S2/DX8700 S2.
*1: Advance notice of battery expiration is issued once "6 months before", once "a week before", and once a
day during the period from "6 days before" to "the expiration date".
● Informational Level
Select whether to notify of an informational event for each event type.
• Recovery module
Select whether to notify when the failed part is recovered by taking actions such as replacement.
When notifying, select the notification method.
• Temperature restoration
Select whether to notify when a temperature error or warning status is recovered to the normal
status. When notifying, select the notification method.
• User login/logout
Select whether to notify when a User login/logout is detected. When notifying, select the
notification method.
• Operated RAID Group
Select whether to notify when the RAID group has been created or deleted. When notifying, select
the notification method.
• Added/Released Hot Spare
Select whether to notify when the hot spare disk has been registered or released. When notifying,
select the notification method.