Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
497
(3) Specify the host information of the iSCSI host that is to be registered, and click the [OK] button.
- iSCSI Name
Specify an iSCSI name of the iSCSI host (required).
The following input conditions apply:
• Alphabetic characters (lower case) and numeric characters
• Symbols "-" (hyphen), "." (period), and ":" (colon)
• The name starts with "iqn." or "eui."
• 4 - 223 characters
→ Returns to the [Manual Input] screen.
Refer to Step (2) (page 493) for other settings.
An error screen appears in the following conditions:
• When the "Name" is not entered
• When the "Name" does not satisfy the input conditions
• When the "Name" is already used for the registration target host
• When the "iSCSI Name" is not entered
• When the "iSCSI Name" does not satisfy the input conditions
• When the "iSCSI Name" is already used for the registration target host
• When the "IP Address" does not satisfy the input conditions
• When the "Alias Name" does not satisfy the input conditions
• When the "Alias Name" is already used for the registration target host
• When the "CHAP User ID" does not satisfy the input conditions
• When the "CHAP Password" does not satisfy the input conditions
• When the "CHAP Password" and the "Confirm CHAP Password" do not match
• When either of the "CHAP User ID" or the "CHAP Password" has been specified