Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
824
• Confirm Password
Select the "Change Password" checkbox and then input the password for proxy server authentication
again. When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
The following input condition applies:
- Up to 64 alphanumeric characters and symbols
→ A confirmation screen appears.
• An error screen appears in the following conditions (when "Enable" is selected for the AIS Connect
function and a proxy server is specified):
- When the specified "Proxy Server" does not satisfy the input conditions
- When the same IP address is specified for "Proxy Server" and the MNT port or the RMT port
- When the IP address for "Proxy Server" and the network address for the MNT port or the RMT
port are the same
- When the IP address for "Proxy Server" and the broadcast address for the MNT port or the RMT
port are the same
- When the same IP address is specified for "Proxy Server" and "AIS Connect Server"
- When either of the "Proxy Server" or the "Port No." has been specified
- When "Port No." does not satisfy the input conditions
- When the "User Name" is not entered
- When the "User Name" does not satisfy the input conditions
- When "Password" is not entered (only when "Change Password" checkbox is selected)
- When "Password" does not satisfy the input conditions (only when "Change Password"
checkbox is selected)
- When "Confirm Password" is not entered (only when "Change Password" checkbox is selected)
- When "Confirm Password" does not satisfy the input conditions (only when "Change Password"
checkbox is selected)
- When "Password" does not match "Confirm Password" (only when "Change Password" checkbox
is selected)
• When "Enable" is selected for "AIS Connect" and "Country of Installation (Country Code : Country
Name)" is not specified, an error screen appears.