Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
656
- For ETERNUS DX410 S2/DX440 S2
8G-FC 2port
8G-FC 4port
16G-FC 2port
16G-FC 4port
10G-iSCSI 2port
1G-iSCSI 2port
10G-FCoE 2port
1G-iSCSI-RA 2port
- For ETERNUS DX8100 S2/DX8700 S2
8G-FC 2port
8G-FC 4port
16G-FC 2port
16G-FC 4port
10G-iSCSI 2port
1G-iSCSI 2port
10G-FCoE 2port
1G-iSCSI-RA 2port
Status
The CA status is displayed. Refer to "B.5 Component Status" (page 977)
for details.
Status Code
The CA status code is displayed.
Part Number
The CA part number is displayed.
Serial Number
The serial number of the CA is displayed.
Hardware Revision
The hardware version of the CA is displayed.
Chip#n Status
The status of Chip#0 or Chip#1 is displayed. Refer to "B.5 Component Status" (page 977)
for details.
Chip#n Status Code
The status code of Chip#0 or Chip#1 is displayed.
Chip#n Error Code
The error code of Chip#0 or Chip#1 is displayed.
Chip#n Active EC
The Edition Control (EC) number of the currently running Chip#0 or Chip#1 is displayed.
Chip#n Next EC
The EC number of the Chip#0 or the Chip#1 that is to be run at the next power-on is displayed.
The 1-port type CA provided by ETERNUS DX80 S2 is also displayed as a 2-port type. To determine whether
the CA is 1-port type or 2-port-type, refer to the port number displayed in the [Internal Parts] tab. Note
that 1-port type CAs are not available in some regions.