Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
387
• Transfer Rate
The transfer speed (fixed at "10 Gbit/s") of the target port is displayed.
• FC Frame Size
The frame size of the target port is displayed.
"FC Frame Size" specifies the length of the communication information.
- 512 bytes
- 1024 bytes
- 2048 bytes
• VLAN ID
The VLAN ID of the target port is displayed.
• Fabric Name
The fabric name of the target port is displayed.
• Reset Scope
The reset scope of the target port is displayed.
Reset scope is the range where the command reset from the server is performed, when the target port is
connected to multiple servers.
- I_T_L (I: Initiator, T: Target, L: LUN)
Reset (cancel) the command request from the server that sent the command reset request.
- T_L (T: Target, L: LUN)
Reset (cancels) the command request from all of the servers that are connected to the port.
• Release Reservation if Chip is Reset
Whether the function to release the reservation status of the volume when the target port (chip) is reset is
enabled or disabled is displayed.
9.1.5 LUN Group
A list of the LUN groups is displayed.
A LUN group is a group of LUNs, which can be recognized by the host. The allocation information of LUNs and
volumes in the ETERNUS DX Disk storage system are configured to the LUN group.