Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
327
iSCSI Name
Specify the iSCSI name of the iSCSI port (required). If not specified, the field is blank. Specify a
unique iSCSI name in the same device.
The following input conditions apply:
- Alphabetic characters (lower case) and numeric characters
- Symbols "-" (hyphen), "." (period) and ":" (colon)
- The name starts with "iqn." or "eui."
- 4 - 223 characters
Alias Name
Specify the Alias Name of the iSCSI port (can be omitted). If not specified, the field is blank.
The following input condition applies:
- Up to 31 alphanumeric characters
User Name
Specify the user name to access the iSCSI port (can be omitted). After specifying the user name,
specify the "Password". If not specified, the field is blank.
The following input condition applies:
- Up to 255 alphanumeric characters and symbols
Password
Specify the password to access the iSCSI port (can be omitted). This item is required when setting
the "User Name". The entry is displayed with "*" or similar characters. If not specified, the field is
blank.
The following input condition applies:
- 12 - 100 alphanumeric characters and symbols
The displayed screen is different depending on the port setting status.
When a device for which port setting is not completed exists
The [Device Configuration Setting] screen appears again. Proceed to Step 5
.
When port setting is completed for all the selected devices
The [Device Information File Selection] screen appears. Proceed to Step 7
.