Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
910
An error screen is displayed when a timeout occurs during the retrieval of destination device
information.
An error screen is displayed when the Storage Migration setting file is in the following conditions:
- The Storage Migration setting file is not specified
- A character code other than the space or tab is placed before the keyword on the left of "="
- The number of the parameters on the right of "=" does not coincided with the specified number
of parameters of the keyword
- The identification code is invalid (only when using a Storage Migration setting file with the
new format)
- "Type" is not "Open"
- The "GROUP" is in the following conditions
Invalid characters are input
- When a value other than a 1-digit hexadecimal number is input for a Storage Migration
setting file in the old format
- When a value other than a 1-digit hexadecimal number is input after the "0x" prefix for a
Storage Migration setting file in the new format
Out of range (not in the 0 - F range)
The same value is duplicated in the Storage Migration setting file
- The Operation mode is not one of the following items: "M", "M+QC", "M+FC", "QC", "FC"
- The destination CA port being set for "PATH" is in the following conditions:
The setting is not correct
The mode is not "Initiator"
The status is abnormal
The same value is duplicated in the Storage Migration setting file
The value is already used in a Storage Migration in execution.
- The source WWN being set for "PATH" is in the following conditions:
The number of characters is not 16
The value is out of range
The first character is "0" or all characters are "F"
The same value is duplicated in the Storage Migration setting file
- The source LUN is in the following conditions:
Invalid characters are input
- When inputting a value other than 4-digit hexadecimal number for a Storage Migration
setting file with the old format
- When the Storage Migration setting file is in the new format and the one of the following
conditions applies to the value that is input:
The value is not a decimal or hexadecimal number
The value is a decimal number that exceeds 256
The value is not a 4-digit or 16-digit hexadecimal number
The same value is duplicated in the Storage Migration setting file