Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
451
(2) Select a host to be registered from the iSCSI host list, register the iSCSI host information (the IP
address and the Alias name, etc.) to the selected host, and click the [Add] button.
- Checkbox to select a host
Select the iSCSI host checkbox to be registered in a host group.
- IP Version
Select the IP version of the iSCSI host from "IPv4" or "IPv6".
- IP Address
Specify the IP address of the member host.
There are two methods to specify an IP address; "IPv4" and "IPv6". The IP address must be
specified with the selected IP version (IPv4 or IPv6). The following IPv6 addresses can be used;
"link local address", "global address", "unique local address", and "6to4 address". Refer to
"Available IPv6 Address" (page 757)
for details. When the current setting is displayed, the IPv6
address is displayed as an abbreviation.
It is not necessary to specify this item if IP address is not used.
The following input conditions apply:
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 0 - 255 for other fields (decimal)
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
If the iSNS server has not been configured in "9.2.3.8 Modify iSCSI Port Parameters" (page
541), the iSCSI host cannot be automatically acquired.
The following restrictions in the environment that is described below apply for the
automatic acquirement of host information (*1) even when the iSNS server is specified.
*1: "iSCSI Name", "IP Version", "IP Address", and "Alias Name"
- When one of the following OSs is used and there are multiple hosts that have the same
iSCSI name but different IP addresses, only the information of one host can be acquired.
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2
Oracle Solaris 10
- When the host OS is Oracle Solaris 11, "IP Version" and "IP Address" cannot be acquired.
The following items can be specified only for the iSCSI hosts that are selected by
checkboxes; "IP Version", "IP Address", "Alias Name", "CHAP User ID", "Change CHAP
Password", "CHAP Password", and "Confirm CHAP Password".
To register an iSCSI host without using an IP address, perform IP version selection as follows:
Select "IPv4" when the IP address format of the iSCSI host is IPv4 (when using an IPv4 host)
Select "IPv6" when the IP address format of the iSCSI host is IPv6 (when using an IPv6 host)
If the IP address format of the iSCSI host cannot be checked (when either an IPv4 host or an
IPv6 host is used), register two hosts. Select "IPv4" for one host, and select "IPv6" for the
other host. Specify the same iSCSI name, CHAP user ID, and CHAP password for each host.