Filter
Top Products
Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
177
4 Click the [OK] button.
→ RAID group creation starts.
5 Click the [Done] button to return to the [RAID Group] screen.
End of procedure
■ Manually selecting drives to create RAID groups
Procedure
1 Click [Create] in [Action].
2 Select "Manual" for "Create Mode".
3 Specify the RAID group detailed information, and click the [Create] button.
• Name
Input a RAID group name that is to be created.
An existing RAID group name cannot be used.
The following input conditions apply:
- Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
• RAID Type
Select the type of RAID group that is to be created from the list box.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- Reliability (RAID5+0)
- Mirroring (RAID1)
- Striping (RAID0)
• Controlling CM
Select the controlling CM and CPU of the RAID group that is to be created.
"Automatic" and the installed "CM#x CPU#y" in normal status are displayed as options.
- Automatic
- CM#x CPU#y (x: CM number, y: CPU number)
Select "Automatic" for normal operations. When "Automatic" is selected, the CM-CPU that is to be
assigned is determined by the RAID group number. Refer to "Appendix F Automatic Controlling CM-
CPU Setting" (page 1011) for details.