Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
324
4 Click the [OK] button.
The [Device Configuration Setting] screen appears.
5 Set the port to be used for the copy path, and click the [Next >>] button.
Port Type
Select the port type to set a copy path. The displayed contents vary depending on the device type.
- For ETERNUS DX90 S2
FC 1-Port, FC 2-Port, iSCSI 1-Port, iSCSI 2-Port, iSCSI-RA (*1)
- For ETERNUS DX410 S2/DX440 S2
FC 2-Port, FC 4-Port, iSCSI 2-Port, iSCSI-RA (*1)
- For ETERNUS DX8100 S2/DX8700 S2
FC 2-Port, FC 4-Port, iSCSI 2-Port, iSCSI-RA (*1)
- For ETERNUS DX90
FC 4-Port
- For ETERNUS DX410/DX440/DX8100/DX8400/DX8700 or ETERNUS4000/ETERNUS8000
FC 1-Port, FC 2-Port, FC 4-Port, iSCSI-RA 1-Port, iSCSI-RA 2-Port
- For ETERNUS6000
FC 2-Port, FC 4-Port
*1: iSCSI-RA is a dedicated adapter that is used for REC between the local device and the ETERNUS DX400
series, the ETERNUS DX8000 series, the ETERNUS4000, or the ETERNUS8000.
Check to use as RA (for an ETERNUS Disk storage system that is not the ETERNUS6000)
Select the port to set a copy path as RA.
The port number is displayed at right side of the checkbox. When "iSCSI-RA", "iSCSI-RA 1-Port", or
"iSCSI-RA 2-Port" is selected in the "Port Type" field, all ports are automatically selected.
- #x (x: Port number (0 - 3))
- When "FC 1-Port" is selected in the "Port Type" field: #0 (#1, #2 and #3 cannot be selected.)
- When "FC 2-Port" is selected in the "Port Type" field: #0, #1 (#2 and #3 cannot be selected.)
- When "FC 4-Port" is selected in the "Port Type" field: #0, #1, #2, #3
- When "iSCSI 1-Port" is selected in the "Port Type" field: #0 (#1 cannot be selected.)
- When "iSCSI 2-Port" is selected in the "Port Type" field: #0, #1
- When "iSCSI-RA" is selected in the "Port Type" field: #0, #1 (All ports are selected.)
- When "iSCSI-RA 1-Port" is selected in the "Port Type" field: #0 (#0 is selected.)
- When "iSCSI-RA 2-Port" is selected in the "Port Type" field: #0, #1 (All ports are selected.)
When no storage system to register the information is selected, the [Device Information File
Selection] screen appears. Proceed to Step 7
.