Filter
Top Products
Appendix J Factory Default List
J.2 Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1041
Add Host Response Inquiry VPD ID Type Type3 (Default)
• Type3 (Default)
• Type1
• Type1 + Type3
Inquiry Standard
Data Version
Version 5 (Default)
• Version 5 (Default)
• Version 4
• Version 3
Command Timeout
Interval
Default (25sec.)
• Default (25sec.)
• Customize
10 – 255 (sec.)
Load Balance
Response
Unit Attention (Default)
• Unit Attention (Default)
• Busy
• Queue Full
Reservation Conflict
Response for Test
Unit Ready
Normal (Default)
• Normal (Default)
• Conflict
Change Volume
Mapping
No Report (Default)
• No Report (Default)
• Report
Volume Capacity
Expansion
No Report (Default)
• No Report (Default)
• Report
Vendor Unique
Sense Code
No Report (Default)
• No Report (Default)
• Report
Host Specific Mode Normal (Default)
• Normal (Default)
• AIX Mode
• HP-UX Mode
• NR1000V Mode
• BS2000 Mode
Asymmetric /
Symmetric Logical
Unit Access
For ETERNUS DX80 S2/DX90 S2,
ETERNUS DX410 S2/DX440 S2,
ETERNUS DX8100 S2
• ACTIVE-ACTIVE /
PREFERRED_PATH (Default)
For ETERNUS DX8700 S2
• ACTIVE / ACTIVE (Default)
For ETERNUS DX80 S2/DX90 S2,
ETERNUS DX410 S2/DX440 S2,
ETERNUS DX8100 S2
• ACTIVE-ACTIVE /
PREFERRED_PATH (Default)
• ACTIVE / ACTIVE
For ETERNUS DX8700 S2
• ACTIVE-ACTIVE /
PREFERRED_PATH
• ACTIVE / ACTIVE (Default)
iSCSI Discovery
Reply Mode
All - Reply All Ports (Default)
• All - Reply All Ports (Default)
• Port - Reply Target Port Only
TPGS Mode Enable (Default)
• Enable (Default)
• Disable
TPG Referrals Disable (Default)
• Enable
• Disable (Default)
iSCSI Reservation
Range
CA Port (Default)
• CA Port (Default)
• Storage System
Function Setting item Default value Allowed input