Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
347
8.2.16 Convert Copy Path
This function outputs the copy path information file for past ETERNUS Disk storage system (hereinafter,
referred to as "previous models").
The copy path information file that is created in ETERNUS DX90 S2, ETERNUS DX410 S2/DX440 S2, or ETERNUS
DX8100 S2/DX8700 S2 is converted to a file format that can be read by previous models and applied for
enabling the execution of Remote Equivalent Copy (REC) with previous models.
The applicable models are shown as follows:
ETERNUS DX90
ETERNUS DX410/DX440
ETERNUS DX8100/DX8400/DX8700
ETERNUS4000
ETERNUS8000
ETERNUS6000
The procedure to convert copy path information file is as follows:
Procedure
1 Click [Convert Copy Path] in [Action].
2 Select the copy path information file that is to be converted, and click the [Create Data]
button.
Copy Path Information File
This specifies the copy path information file for which the file format is converted.
Click the [Browse...] button to specify the copy path information file, or directly input the path to
the copy path information file.
Target Device Box ID
The Box ID of the ETERNUS DX Disk storage system set as file format conversion target in the copy
path information file that was read is displayed as an option.
Select the Box ID of the ETERNUS DX Disk storage system for which the file format is converted.
Conversion is performed only on the copy path information file created by the procedure in "8.2.12 Set
Copy Path" (page 318) or the copy path information file obtained by the procedure in "8.2.14 Export All
Copy Path" (page 344).
This function cannot be executed unless there is an ETERNUS DX Disk storage system set as the
conversion target in the copy path information file.
Apply the converted copy path information file to each ETERNUS DX Disk storage system by using the copy
path setting function for each ETERNUS DX Disk storage system that is set as a conversion target.